When you're replacing your home's roof, there are many different steps to take. First, you need to remove the old roofing material. Next, you need to install new flashing and underlayment. Once the underlayment is installed, it's time to install the new shingles. Before you begin, you'll want to take a few precautions. It is important to remove old nails so you don't damage the new ones. Also, you may want to lay down tarps to protect your landscaping and catch thousands of nails falling to the ground. You should also use a self-stick ice-and-water underlayment if you're going to install a roof on a new house.

 

After you've gathered all of your materials, you'll want to get started. This is the most important step of the entire process. Depending on the size of the job, the number of shingles needed, and when you're having the work done, a new roof can take anywhere from one to fourteen days. However, because of unforeseen circumstances, the timeline may change slightly. To be safe, try to set a deadline for completion so you'll know what to expect, click here for more info.

 

Then, choose the type of roofing. You can either hire a professional to do the work for you, or you can do it yourself. Choosing a roofing material is a good idea as these materials are known for their long lifespan. If you're not sure whether or not you're up for this task, you can contact a local roofing company to help you. The best way to find a contractor for this job is to compare several and decide which one best suits your home and your needs.

 

The next step is the underlayment. It is important to ensure that the first row of shingles is square with the top and bottom edges. The lower row of shingles should overlap the next row of shingles by at least six inches. The underlayment should reach the top of the roof's peak and should overlap the two previous rows. Finally, be sure to cap the underlayment on both sides of the roof. If it is not, you can always use a tin snip from orlando roofing firm to make the overlapping process even more easy.

 

Once the underlayment has been installed, the drip edge should be installed. Start at the gable and continue up the roof, overlapping it every few inches. If you are not sure how to cut the drip edge, you can use tin snips to do it. The bottom ridge will be the first ridge to be installed. Then, continue working on the rest of the ridge and the roof. In this way, you should be able to see any problem areas that can arise during installation.

 

Typically, the rafters are cut from framing lumber, and then are screwed in place. Then, the roof sheathing is installed. If it's not properly installed, it will rot. The eaves and valleys are the most common problems. In these areas, the shingles are overlapped. If they are not, you should make sure that the eaves are straight and the eaves are installed correctly. Check out this post for more details related to this article: https://en.wikipedia.org/wiki/Roof.